GARD PRO NL logo
GARD PRO NL logo
All articles

USER MANUAL-GARD PRO ULTRAUpdated 6 months ago

  1. NEDERLANDSE HANDLEIDING
  2. DEUTSCHES HANDBUCH
  3. MANUAL FRANCAIS



1. APP INSTALLATION

  1. Scan the QR code below or download the "GloryFit" app from application markets to install the linked app.
  2. Device requirements: iOS 9.0 or higher; Android 4.4 or higher, with support for bluetooth 5.3.


2. CONNECTING

a. Device connection:

  1. Open the app GloryFit. You will be asked for your email address, then press ''get captcha''. A ''captcha'' (5-digit code) will be sent by email. Fill it in at ''Captcha'' and press ''Log in'' Next, you will be asked for an information sheet about background activities, press ''Ignore'' here. Then fill in the requested information. You can go to the next screen by pressing ''>'' at the bottom. Once you have entered the information, click on ''Select Device'', click on the appropriate model and follow the instructions to connect.

b. Bluetooth connection:

  1. Bluetooth connection: After successful pairing, the APP will automatically save the Bluetooth address of the GARD PRO. And it will always remain connected during use. To activate various functions, you need to click on ''Device'' at the bottom of the GloryFit app. Here you can enable and disable all functions. Think Bluetooth calling, texting, Whatsapp, Facebook & Gmail.

c. Synchronized contacts:

While setting up the Gard Pro Ultra, you will be asked to provide access to use your contacts. You must allow this.

  1. Open the GloryFit app. Open ''Device.'' 
  2. Then press ''Bluetooth Call.'' 
  3. Follow the instructions at ''Sync Contacts''

Note: that you can add a maximum of 100 contacts to your list.

d. If the connection between the Gard Pro Ultra and your phone is broken, follow these steps:

  1. Go to your phone's settings and select Bluetooth. 
  2. Find "GARD PRO" and select "forget this device". 
  3. Restart your phone. 
  4. Launch the GloryFit app and follow the connect instructions.

Note: you could possibly choose to also completely uninstall the GloryFit app to redo entire installation process.


3. INSTRUCTIONS FOR QUICK USE

a. Turning on the Gard Pro Ultra:

  • Make sure the Gard Pro is charged and press and hold the power button for 3 seconds. The Gard Pro Ultra will vibrate to indicate it is turned on.

b. Disable the Gard Pro Ultra:

  • If you want to turn off the Gard Pro Ultra you need to hold down the power button for ± 3 seconds. Then the Gard Pro will ask you to turn off the device. Press the green check mark.


4. SCREEN ACTIVITY AND DISPLAY

Screen settings can be changed in both the Gard Pro itself and in the GloryFit app.

a. Enable the do not disturb feature on your Gard Pro Ultra:

  1. Open the GloryFit app.
  2. Go to "Device."
  3. Go to "Do not disturb."
  4. Enable do not disturb by pressing the button next to "Set the time."
  5. Set the start and end time for when you want to enable the do not disturb feature.
  6. You can also turn off the vibration function by pressing the button next to "Vibration mode off."
  7. You can also turn off messages by pressing the button next to "Message off."

b. Automatically turn on screen when turning on:

  1. Open the GloryFit app.
  2. Go to "Device."
  3. Go to "Light up."
  4. Enable "Closed" by tapping the button on the right.

c. Adjust the brightness of your screen:

  1. On the home screen, swipe down.
  2. Tap the ''Sunshine'' icon.
  3. Adjust the screen brightness by pressing the ''-'' or ''+'' button. Swipe right to exit screen brightness adjustment.

d. Adjust bright screen duration:

The duration of the bright screen is adjustable. (5, 10 or 15 seconds).

  1. On the home screen, swipe down.
  2. Select settings.
  3. Then press ''Brightness'' the light icon.
  4. Here you can select the desired screen time.


5. SPORTS - ACTIVITIES MONITORING

Choose from more than 100 sports activities.

a. Go to the sports interface:

  1. From the home screen, swipe right and select ''Training''.
  2.  Select a specific sports activity. 
  3. After a three-second countdown, this sports activity starts. 
  4. Swipe right to pause the monitoring.
  5.  Click the red ''Stop'' button to end the sports activity.

TIP: To see your route in case of a walk, for example, you need to start the sports activity via the GloryFit app. You do this at the bottom of the app under ''Sports''. (You need to have the location feature on for this).


6. DAILY ACTIVITIES STATUS

a. Pedometer, distance and calorie status view:

  1. Access the activity status, by swiping left once on the home screen, to view the current number of calorie consumption, steps, and distance traveled. Distance and calories are calculated and displayed based on current steps and height and weight set in the app. By having location feature on, you ensure that measurements are more accurate.

b. Adjust your daily step goal as follows:

  1. At the bottom of the GloryFit app, go to ''Profile.'' 
  2. Select the top bar to enter/change a profile picture, name and your information. 
  3. To change your step goal press ''Goal'' at ''Profile''.


7. CALLING AND APP MESSAGES

a. Getting incoming calls visible:

  1. At the bottom of the GloryFit app, go to ''Device''.
  2. Select ''Phone.''
  3. When both bars turn green, you can take and make calls.

b. Enable text message notifications via vibration:

  1. At the bottom of the GloryFit app, go to ''Device''.
  2. Select ''App.''
  3. Then press the individual apps you want to receive notifications from on your GARD PRO.
  4. When the bar turns green your messages will receive notifications.

c. Enable call notifications via Vibrate:

  1. From the home screen, swipe down and select settings.
  2. Select ''Sound Setting'' to turn silent mode on or off.
  3. When the bar is green silent mode is on.

Note: If this does not work go to your phone's settings and find the app GloryFit. Then check that you have given permission to receive messages. Also check per app if the 'show preview' is set to 'always'.


8. HEART RATE MONITORING

By default, the Gard Pro Ultra continuously monitors heart rate for 24 hours. You can turn this feature on or off in the GloryFit app. To use the heart rate monitor on the Gard Pro Ultra, follow these steps:

  1. Make sure the Gard Pro Ultra is worn securely and in contact with your wrist. 
  2. Swipe from the main interface to the heart rate interface. 
  3. The Gard Pro Ultra will automatically begin measuring your heart rate.
  4.  Wait for the measurement to complete. The heart rate reading will be displayed on the screen.


9. BLOOD PRESSURE MONITOR

a. Automatic blood pressure measurement:

Switch to the blood pressure interface to start automatic blood pressure measurement.

  1. Make sure the Gard Pro Ultra is worn securely on the wrist with no gaps.
  2. From the home screen, swipe right once and select ''Blood Pressure.''
  3. The Gard Pro Ultra will automatically begin measuring your blood pressure. Wait for the measurement to complete.
  4. The blood pressure reading will be displayed on the screen.


10. BLOOD OXYGEN MONITOR

a. Blood oxygen monitoring on the Gard Pro Ultra:

  1. Make sure the Gard Pro Ultra is worn securely and in good contact with your wrist.
  2. From the home screen, swipe right once and select ''Oxygen saturation.''
  3. The Gard Pro Ultra automatically begins measuring.
  4. The blood oxygen reading is displayed on the screen.

Note: For accurate results, make sure the Gard Pro Ultra is worn properly and avoid excessive movement during measurements.


11. WEATHER FORECAST

a. Weather and temperature conditions:

  • Switch to the weather interface to view weather and temperature. Weather conditions are automatically updated 24 hours a day.


12. MUSIC CONTROL

a. Music playback controls:

  • After successfully connecting the paired app - "GloryFit," the Gard Pro Ultra can control music playback functions such as pause, previous song and next song when the phone is playing music.


13. SLEEP FOLLOWING

a. Sleep quality control:

  • Switch to the sleep interface to check the previous night's sleep quality.

CAUTION: Put the GARD PRO on the sleep interface when you go to sleep.


14. BODY TEMPERATURE

a. Automatic measurement of body temperature:

  • Switch to the body temperature interface to automatically measure body temperature. The measurement interval can be set in the app. The default alarm threshold is 37.3°C, but you can also change this setting in the app.

b. Change the unit of measurement:

  1. Open the GloryFit app.
  2. Go to "Device."
  3. Then go to "Body temperature settings."
  4. Select "Unit."
  5. Here you can choose a unit you want to use.

c. Adjust temperature settings:

  1. Open the GloryFit app. 
  2. Go to "Device." 
  3. Then go to "Body temperature settings" .
  4.  Enable "Automatic setting" - this feature sets your watch to detect your temperature at set times.


15. ALARM CLOCK SETTINGS

a. Managing alarm clocks:

You can add an alarm so the Gard Pro keeps you informed. You can set up to 6 groups of alarms.

b. Set an alarm clock:

  1. From the home screen, swipe right and select ''Alarm Clock.'' 
  2. Then press the green + button. 
  3. Here you get the choice to set different alarm clocks.


16. BREATHING TRAINING

a. Automatic respiratory rate measurement:

  1. From the home screen, swipe right and select ''Breathe.''
  2. Here you get the choice to set different sessions.
  3. Choose from the time and speed of breathing frequencies.
  4. Then press ''Start Now'' to start the session.


17. SEDENTARY REMINDER

a. Setting motion inhibitors:

  1. At the bottom of the GloryFit app, go to ''Device''.
  2. Select ''Sedentary reminder.''
  3. When the bar turns green, the function is on.
  4. Now you can set a start and end time and a do not disturb time.


18. FINDING MY  PHONE

a. The Find My Phone feature:

  1. From the home screen, swipe right and select ''Find Me.''
  2.  Next, your cell phone will play a ringtone. 
  3. Now you have found your cell phone.


19. DIAL - BACKGROUND

a. Changing your dial:

  1. At the bottom of the GloryFit app, go to ''Device.''
  2. Select ''Watch faces'' and wait for all watch faces to load.
  3. Choose your favorite watch face to download it.
  4. Now the watch face will appear on your GARD PRO.
  5. You also have a choice of 5 preset watch faces on your GARD PRO.
  6. Hold the home screen for ± 3 seconds and swipe right or left.


20. SOS-CONTACT

a. Setting up your personal SOS contact:

  1. At the bottom of the GloryFit app, go to ''Device''.
  2. Select ''SOS Contact.''
  3. Then press ''Add+.''
  4. Now you can select one or more contacts.
  5. When you now press ''SOS'', a call will be made directly to your set SOS contact.


IMPORTANT INFORMATION

a. Inaccurate measurements:

Usually, inaccurate readings occur due to poor contact between the GARD PRO's sensor and the wrist. So make sure there is full contact between the sensor and the wrist during measurements. Soiled, damp or hair density can affect the measurements.

b. Inaccurate sleep data:

Sleep monitoring simulates natural sleep and wake times, so wearing it correctly is important. Errors can occur if you start wearing the GARD PRO too late at night. No sleep data is monitored during the day. Standard period for sleep monitoring is from 9:30 p.m. to 12:00 a.m. the next day.

c. Bluetooth problems:

Restart the GARD PRO and reconnect to the GloryFit app. Is this not working?

  1. Close the GloryFit app completely.
  2. Turn off your cell phone.
  3. Give your GARD PRO a reset by going to ''Settings'' and then pressing ''Reset''.
  4. Restart your cell phone and ensure a proper connection between the GloryFit app and your GARD PRO.

Note: you could possibly choose to also completely uninstall the GloryFit app to redo entire installation process.


Warranty 
With normal use of the GARD PRO, our warranty is valid for a period of two years from the date of purchase for manufacturing defects. 

During this period, if the product does not function as advertised or is found to be defective, we (Gard Pro) will repair or replace the product at no additional cost to you. This warranty does not cover damage caused by misuse, water, fall or general improper handling of the smartwatch. Examples include: 

  • Errors caused by disassembly or modification of the GARD PRO. 
  • Any man-made damage or errors caused by third parties. 

To claim this warranty, you must present proof of purchase and contact us by email for instructions on how to proceed. This warranty is non-transferable and applies only to the original purchaser of the product.


Insurance GARDCARE+ 
Protect your Gard Pro smartwatch with our GARDCARE+ insurance! With our insurance you are covered against damages and even mishaps such as water or screen damage. That's why we offer fast and hassle-free claims services.

 So every GARD PRO smartwatch comes with a standard 2-year warranty. 

WITH GARDCARE+ 
You extend your coverage from your GardCare+ purchase date and have unlimited repairs against accidental damage.


Was this article helpful?
Yes
No